Serving Port St. Lucie, St. Lucie West, Tradition and the Treasure Coast
Free on-site estimates
Written price before any work
Gate installation and repair

Gate Installation in Port St. Lucie

A new walk gate costs about $350–$900 each installed in Port St. Lucie, a double drive gate about $900–$2,500 each. We build gates in every fence material, add them to existing fences, and fix gates that sag, drag or won't latch.

  • Walk, double drive, rolling
  • Added to existing fences
  • Re-hangs and new hardware

Get a free fence quote

We measure on site. No obligation.

Or call (772) 296-2392 and talk to us now

Walk gate

$350–$900 each installed, matched to the fence.$350–$900 each.

Double drive gate

$900–$2,500 each for boat, trailer or vehicle access.$900–$2,500 each.

Gate re-hang

$100–$400 per gate for a gate that drags or won't latch.$100–$400 per gate.

Ornamental black metal gate in front of a well-kept two-story home
A double gate needs stout posts on both sides and a bolt to hold the fixed leaf.

Gates take more abuse than any other part of a fence, so we build them heavier than the panels around them. A walk gate costs about $350–$900 each installed in Port St. Lucie, a double drive gate about $900–$2,500 each, and a rolling gate about $2,500–$8,000 each. We also add gates to existing fences and repair ones that have stopped working.

Gates we build

  • Walk gates, usually 4 to 5 feet wide, wide enough for a mower and a wheelbarrow.
  • Double drive gates for a car, trailer, boat or RV, typically 10 to 16 feet across two leaves.
  • Rolling (cantilever or track) gates where there is no room for a gate to swing, common on driveways and commercial yards.
  • Pool gates with self-closing hinges and self-latching hardware set at the required height. See pool fences.
  • Automatic gates. Swing or slide openers with remotes or keypads, about $2,000–$6,000 installed including the opener, which needs a power supply nearby.

Why gates sag, and how we stop it

A gate hangs its whole weight off one post, and it gets slammed, leaned on and swung in the wind. If that post is the same size as the line posts, or is set shallow in sand, the gate drops within a season. We set gate posts deeper and in more concrete, reinforce vinyl gate posts with aluminum or steel inserts, build gate frames from metal, and use adjustable hinges so a small drop can be corrected later in minutes rather than by rebuilding.

Adding a gate to an existing fence

Want a second gate on the far side of the yard, or a wider opening to get a boat or a pool contractor's equipment through? We can cut an opening into most existing fences, set new posts and hang a matching gate. Where your fence style is discontinued, we will find the nearest match.

Gate repair

Re-hanging a dragging gate runs about $100–$400 per gate; new hinges, latches or drop rods about $75–$250 per gate. If the gate post itself has failed, it gets reset in concrete first. The price guide has the other repair prices.

About these prices: gate prices are estimates that depend on width, material and hardware. You will have a written figure before anything is ordered.

Last updated October 8, 2026

Gates: common questions

How wide should a driveway gate be?

For a car, at least 10 to 12 feet; for a boat or RV, 14 to 16 feet is safer. Measure the widest thing you will tow and add room to turn.

Can you automate my existing gate?

Sometimes. The gate and posts have to be strong and straight enough to take an opener, and there needs to be power nearby. We will check both.

Why won't my gate latch any more?

The gate has dropped or the post has leaned, so the latch no longer lines up. Usually an adjustment, new hinges or a post reset fixes it.

Do gates need a permit?

A gate built as part of a new fence is covered by the fence permit. For a gate added to an existing fence, ask us first: the city may treat it as fence work that needs the application, and pool gates must always meet the barrier rules.

Want a price on it?

Call or send the form and we will come out, measure and leave you a written quote.

(772) 296-2392
Estimates are free and the price comes in writing.
  1. Call or send the formGive us your address and what you need. We set a time to come out.
  2. We measure and quoteWe walk the fence line with you and leave a written price.
  3. Permit, then installWe pull the permit, build the fence and walk it with you before we leave.
Call nowFree quote